• Also Known As:
  • Joint Fluid Analysis
Medically Reviewed by Expert Board

This page was fact checked by our expert Medical Review Board for accuracy and objectivity. Read more about our editorial policy and review process.

This article was
last modified The modified date indicates that one or more changes were made to the article. Such changes may or may not result from a full review of the article, so the two dates may not always agree.

At a Glance

Why Get Tested?

To help diagnose the cause of joint inflammation, pain, and/or swelling

When To Get Tested?

When one or more of your joints are swollen, red, and/or painful

Sample Required?

A synovial fluid sample is obtained by inserting a needle into the space between the bones at a joint

Test Preparation Needed?

Consult with your healthcare provider; synovial fluid collection and analysis may be performed after fasting or at random.

You may be able to find your test results on your laboratory’s website or patient portal. However, you are currently at Lab Tests Online. You may have been directed here by your lab’s website in order to provide you with background information about the test(s) you had performed. You will need to return to your lab’s website or portal, or contact your healthcare practitioner in order to obtain your test results.

Lab Tests Online is an award-winning patient education website offering information on laboratory tests. The content on the site, which has been reviewed by laboratory scientists and other medical professionals, provides general explanations of what results might mean for each test listed on the site, such as what a high or low value might suggest to your healthcare practitioner about your health or medical condition.

The reference ranges for your tests can be found on your laboratory report. They are typically found to the right of your results.

If you do not have your lab report, consult your healthcare provider or the laboratory that performed the test(s) to obtain the reference range.

Laboratory test results are not meaningful by themselves. Their meaning comes from comparison to reference ranges. Reference ranges are the values expected for a healthy person. They are sometimes called “normal” values. By comparing your test results with reference values, you and your healthcare provider can see if any of your test results fall outside the range of expected values. Values that are outside expected ranges can provide clues to help identify possible conditions or diseases.

While accuracy of laboratory testing has significantly evolved over the past few decades, some lab-to-lab variability can occur due to differences in testing equipment, chemical reagents, and techniques. This is a reason why so few reference ranges are provided on this site. It is important to know that you must use the range supplied by the laboratory that performed your test to evaluate whether your results are “within normal limits.”

For more information, please read the article Reference Ranges and What They Mean.

What is being tested?

Synovial fluid is a thick liquid that acts as a lubricant for the body’s major joints. It is found in small quantities in the spaces between the joints, where the fluid is produced and contained by synovial membranes. Synovial fluid cushions bone ends and reduces friction during joint movement in the knees, shoulders, hips, hands, and feet.

Synovial fluid analysis consists of a group of tests that detect synovial fluid changes and may indicate the presence of diseases affecting joint structure and function. The analysis usually involves an initial basic set of tests, followed by additional tests selected based on the results of the first set of tests, the person’s symptoms, and the disease that the healthcare practitioner suspects is causing the symptoms. Tests can be grouped according to:

  • Physical characteristics—an evaluation of the fluid’s appearance
  • Chemical tests—detect changes in the fluid’s chemical constituents 
  • Microscopic examination— cells and crystals that may be present are counted and identified by type under a microscope
  • Infectious disease tests—detect and identify microbes, if present

How is the sample collected for testing?

A sample of synovial fluid is collected from the affected joint with a syringe and needle using a procedure called an arthrocentesis.

Is any test preparation needed to ensure the quality of the sample?

Consult with the healthcare provider about test preparation. Synovial fluid collection and analysis may be performed after fasting or at random.

Common Questions

How is it used?

Synovial fluid analysis may be ordered to help diagnose the cause of joint inflammation, pain, swelling, and fluid accumulation. Diseases and conditions affecting one or more joints and the synovial fluid can be divided into four main categories:

  • Infectious diseases – those caused by bacteria, fungi, or viruses. They may originate in the joint or spread there from other places in the body. These conditions include acute and chronic septic arthritis.
  • Bleedingbleeding disorders and/or joint injury can lead to blood in the synovial fluid. This is commonly present in people with untreated blood clotting disorders such as hemophilia or von Willebrand disease.
  • Inflammatory diseases –
    • Conditions that cause crystal formation and accumulation such as gout (needle-like uric acid crystals) and pseudogout (calcium pyrophosphate dihydrate crystals). These typically affect the feet and legs.
    • Conditions that cause joint inflammation, such as synovitis, or other immune responses. These may include autoimmune disorders such as rheumatoid arthritis and lupus.
  • Degenerative diseases – such as osteoarthritis

When is it ordered?

Synovial fluid analysis may be ordered when a healthcare practitioner suspects that a person has a condition or disease involving one or more of their joints. It may be ordered when someone has some combination of the following signs and symptoms:

  • Joint pain
  • Redness over the joint
  • Joint inflammation and swelling
  • Synovial fluid accumulation

It may sometimes be ordered to monitor a person with a known joint condition.

What does the test result mean?

Synovial fluid usually contains a small amount of glucose and protein and may have a few white blood cells (WBCs) and red blood cells (RBCs).

There are a variety of joint abnormalities, including osteoarthritis, rheumatoid arthritis, gout, and infection (septic arthritis), that can cause inflammation, swelling, an accumulation of synovial fluid, and sometimes bleeding into one or more joints. These conditions can limit mobility and, if left untreated, may permanently damage the joints.

Results of tests performed on a sample of synovial fluid may include:

Physical characteristics – the normal appearance of a sample of synovial fluid is usually:

  • Straw colored
  • Clear
  • Moderately viscous – drops of it from a syringe needle will form a “string” a few inches long.

Changes in the physical characteristics may provide clues to the disease present, such as:

  • Less viscous fluid may be seen with inflammation.
  • Cloudy synovial fluid may indicate the presence of microbes, white blood cells, or crystals.
  • Reddish synovial fluid may indicate the presence of blood, but an increased number of red blood cells may also be present in cloudy synovial fluid.

An individual’s joint may be affected by more than one of these physical changes at a time.

Chemical tests – tests that may be performed on synovial fluid samples include:

  • Glucose—typically a bit lower than blood glucose levels; may be significantly lower with joint inflammation and infection.
  • Protein—increased with bacterial infection
  • Uric acid—increased with gout

Microscopic examination – Normal synovial fluid has small numbers of white blood cells (WBCs) and red blood cells (RBCs) but no microbes or crystals present. Laboratories may examine drops of the synovial fluid and/or use a special centrifuge (cytocentrifuge) to concentrate the fluid’s cells at the bottom of a test tube. Samples are placed on a slide, treated with special stain, and an evaluation of the different kinds of cells present is performed.

  • Total cell counts—number of WBCs and RBCs in the sample; increased WBCs may be seen with infections and with conditions such as gout and rheumatoid arthritis.
  • A WBC differential determines the percentages of different types of WBCs. An increased number of neutrophils may be seen with bacterial infections. Greater than 2% eosinophils may suggest Lyme disease, parasitic arthritis, rheumatoid disease, or tubercular arthritis.
  • Synovial fluid is evaluated under polarized light to recognize the presence of crystals and to distinguish the types of crystals that are present. Needle-like monosodium urate crystals are associated with gout and calcium pyrophosphate crystals are associated with pseudogout.

Infectious disease tests – in addition to chemistry tests, other tests may be performed to look for microbes if infection is suspected.

  • Gram stain allows for the direct observation of bacteria or fungi under a microscope. There should be no microbes present in synovial fluid.
  • Culture and susceptibility testing is ordered to determine what type of microbes are present. If bacteria are present, susceptibility testing against certain antibiotics can be performed to guide antimicrobial therapy. If there are no microbes present, it does not rule out an infection; they may be present in small numbers or their growth may be inhibited because of prior antibiotic therapy.
  • Other tests for infectious diseases that are less commonly ordered include AFB testing. This test for the presence of mycobacteria may help diagnose tuberculosis. Molecular test methods for Mycobacteria tuberculosis are more sensitive and specific than traditional cultures and may also be performed.

Is there anything else I should know?

A blood or urine uric acid or blood glucose test may be ordered to compare concentrations with those in the synovial fluid. If a healthcare practitioner suspects that an individual has a systemic infection, then a blood culture may be ordered in addition to the synovial fluid analysis.

Joint injury, surgery, and joint replacement can increase the risk of developing an infection in a joint.

What is arthrocentesis and how is it performed?

Arthrocentesis is the removal of synovial fluid from a joint with a needle and syringe. A healthcare practitioner applies local anesthetic and inserts the needle into the space between the bones and collects the synovial fluid.

Are there other reasons to do an arthrocentesis?

Yes. Sometimes it will be performed to drain excess synovial fluid – to relieve pressure in the joint and/or to aid in the treatment of an infection. Sometimes medicines such as corticosteroids will be introduced into the joint to help reduce inflammation and/or to relieve pain.

View Sources

Sources Used in Current Review

Mundt, L. A. and Shanahan, K. (© 2010) Graff’s Textbook of Routine Urinalysis and Body Fluids 2nd Edition: Lippincott Williams and Williams, Philadelphia, PA. Pp 258.

Villa-Forte, A. (Reviewed 2013 September). Evaluation of the patient with joint disorders. Merck Manual for Healthcare Professionals. Available online at http://www.merckmanuals.com. Accessed 9/9/2016.

Baer, A. N. (Updated 2014 January 3). The approach to a painful joint. Medscape Reference. Available online at http://emedicine.medscape.com/article/336054-overview#a8. Accessed 9/9/2016.

Ma, B. C. (Updated 2015 May 9). Synovial fluid analysis. MedlinePlus Medical Encyclopedia. Available online at http://www.nlm.nih.gov/medlineplus/ency/article/003629.htm. Accessed 9/9/2016.

Brusch, J. L. (Updated 2015 October 8). Septic arthritis workup. Medscape Reference. Available online at http://emedicine.medscape.com/article/236299-workup#c8. Accessed 9/9/2016.

Sofronescu, A. (Updated 2016 April 13). Joint fluid interpretation. Medscape Reference. Available online at http://emedicine.medscape.com/article/2172238-overview. Accessed 9/9/2016.

Fisher, M. and Genzen, J. R. (Updated 2016 August). Hyperuricemia – Gout. ARUP Consult. Available online at http://www.arupconsult.com/Topics/Gout.html?client_ID=LTD#tabs=0. Accessed 9/9/2016.

(Updated 2016 August). Rheumatoid arthritis. ARUP Consult. Available online at https://arupconsult.com/content/rheumatoid-arthritis/?tab=tab_item-0. Accessed 9/9/2016.

Sources Used in Previous Reviews

Pagana, Kathleen D. & Pagana, Timothy J. (© 2007). Mosby’s Diagnostic and Laboratory Test Reference 8th Edition:  Mosby, Inc., Saint Louis, MO. Pp 133-136.

Wu, A. (2006). Tietz Clinical Guide to Laboratory Tests, Fourth Edition.  Saunders Elsevier, St. Louis, Missouri. 1006-1007.

Thomas, Clayton L., Editor (1997). Taber’s Cyclopedic Medical Dictionary.  F.A. Davis Company, Philadelphia, PA [18th Edition]. pp 1890.

Forbes, B. et. al. (© 2007). Bailey & Scott’s Diagnostic Microbiology, Twelfth Edition: Mosby Elsevier Press, St. Louis, Missouri. Pp 904 – 913.

Joseph, T. (2007 May 6). Synovial fluid. MedlinePlus Medical Encyclopedia [On-line information].  Available online at http://www.nlm.nih.gov/medlineplus/ency/article/003629.htm. Accessed on 6/21/08.

Lee, S. (2007 April 27, Updated). Septic arthritis. MedlinePlus Medical Encyclopedia [On-line information]. Available online at http://www.nlm.nih.gov/medlineplus/ency/article/000430.htm. Accessed on 6/21/08.

Lee, S. (2007 June 18, Updated). Gout – chronic. MedlinePlus Medical Encyclopedia [On-line information]. Available online at http://www.nlm.nih.gov/medlineplus/ency/article/000424.htm. Accessed on 6/21/08.

Zeller, J. et. al. (2007 April 4). Septic Arthritis. JAMA Patient Page JAMA. 2007;297(13):1510 [On-line information]. PDF available for download at http://jama.ama-assn.org/cgi/reprint/297/13/1510.pdf. Accessed on 6/21/08.

Lee, S. (2007 April 26, Updated). Acute gouty arthritis. MedlinePlus Medical Encyclopedia [On-line information]. Available online at http://www.nlm.nih.gov/medlineplus/ency/article/000422.htm. Accessed on 6/21/08.

Jacobs DS, DeMott WR, Oxley DK: Jacobs & DeMott Laboratory Test Handbook, 5th ed. LexiComp:Hudson, OH. Pp323-325, 2001.

Vorvick, L. (Updated 2011 June 4). Synovial fluid analysis. MedlinePlus Medical Encyclopedia [On-line information]. Available online at http://www.nlm.nih.gov/medlineplus/ency/article/003629.htm. Accessed February 2012.

Sweiss, N. et. al. (Updated 2012 February 7). Septic Arthritis Aspiration Techniques and Indications for Surgery. Medscape Reference [On-line information]. Available online at http://emedicine.medscape.com/article/1268807-overview. Accessed February 2012.

Berman, J. and Paget, S. (Modified 2009 January). Evaluation of the Patient With Joint Disorders. Merck Manual for Healthcare Professionals [On-line information]. Available online through http://www.merckmanuals.com. Accessed February 2012.

(© 1995–2012). Test ID: CCBF8419 Cell Count and Differential, Body Fluid. Mayo Clinic Mayo Medical Laboratories [On-line information]. Available online at http://www.mayomedicallaboratories.com/test-catalog/Clinical+and+Interpretive/8419. Accessed February 2012.

(© 1995–2012). Test ID: SFC8719 Crystal Identification, Synovial Fluid. Mayo Clinic Mayo Medical Laboratories [On-line information]. Available online at http://www.mayomedicallaboratories.com/test-catalog/Overview/8719. Accessed February 2012.

(2011 July) Questions and Answers about Arthritis and Rheumatic Diseases. National Institute of Arthritis and Musculoskeletal and Skin Diseases [On-line information]. Available online at http://www.niams.nih.gov/Health_Info/Arthritis/arthritis_rheumatic_qa.asp. Accessed February 2012.

Lehman, C. and Roberts, W. (Updated 2011 May). Hyperuricemia – Gout. ARUP Consult [On-line information]. Available online at http://www.arupconsult.com/Topics/Gout.html?client_ID=LTD#tabs=0. Accessed February 2012.

Pagana, K. D. & Pagana, T. J. (© 2011). Mosby’s Diagnostic and Laboratory Test Reference 10th Edition: Mosby, Inc., Saint Louis, MO. Pp 132-135.

Ask a Laboratory Scientist

This form enables patients to ask specific questions about lab tests. Your questions will be answered by a laboratory scientist as part of a voluntary service provided by one of our partners, American Society for Clinical Laboratory Science. Please allow 2-3 business days for an email response from one of the volunteers on the Consumer Information Response Team.

Ask a Laboratory Scientist